Our Recently Granted Journals

Ankan Das, Pankaj Biswas, and?Sajan Kapil, 2024, ?Influence of Friction Stir Additive Manufacturing Parameters on Dry Friction and Wear Properties of Al?Mg?Si Alloy?s Built Surfaces Fabricated by Sheet Lamination.? Journal of Tribology 146, no. 5.

Ankan Das, Tanmoy Medhi,?Sajan Kapil, and Pankaj Biswas. 2024, ?Different build strategies and computer-aided process planning for fabricating a functional component through hybrid-friction stir additive manufacturing.? International Journal of Computer Integrated Manufacturing 37, no. 3: 350-371

Atul Rajput, Manas Das, and?Sajan Kapil. 2024, ?A Hybrid-Electrochemical Magnetorheological (H-ECMR) Finishing Process for Surface Enhancement of Biomedical Implants.? Journal of Manufacturing Science and Engineering: 1-41

Atul Singh Rajput, Ambrish Singh,?Sajan Kapil, and Manas Das, 2024 ?Nanofinishing of DED topologically optimized fixation plates with H-ECMR finishing.? Materials and Manufacturing Processes: 1-12

Sadaival Singh, Ambrish Singh,?Sajan Kapil, and Manas Das., 2024, ?Generation of Continuous and Sparse Space Filling Toolpath with Tailored Density for Additive Manufacturing of Biomimetics.? Computer-Aided Design: 103718

Ritam Sarma, Amit Kumar Singh,?Sajan Kapil, Swarup Bag, and Shrikrishna N. Joshi, 2023, ?Evolution of near homogenous mechanical and microstructural properties in wire-arc based directed energy deposition of low carbon steel following trochoidal trajectory toolpath.? Journal of Materials Processing Technology: Vol 315, 117921

Atul Singh Rajput, Manas Das, and?Sajan Kapil, 2023,?Investigation of surface Characteristics on Post Processed Additively Manufactured Biomaterial through Magnetorheological Fluid Assisted Finishing process.? Wear Vol.522, 204684

Atul Singh Rajput,?Sajan Kapil, and Manas Das, 2023, ?Computer-aided process planning system for super finishing of flat surfaces with pockets through magnetorheological finishing process.? International Journal of Computer Integrated Manufacturing: 1-17

Anand Mohan Pandey,?Sajan Kapil, and Manas Das, 2023, ?Experimental investigation of localized electrochemical deposition-based micro-additive manufacturing process.? Materials and Manufacturing Processes: 1-13

Atul Singh Rajput, Sajan Kapil, and Manas Das. 2023, ?Surface Enhancement of Additively Manufactured Bone Plate Through Hybrid-Electrochemical Magnetorheological Finishing Process.? 3D Printing and Additive Manufacturing

Atul Singh Rajput,?Sajan Kapil, and Manas Das. 2023, ?A post processing technique to achieve nanofinishing for functionality enhancement of Ti-6Al-4V femoral head fabricated by Laser Powder Bed Fusion.? CIRP Journal of Manufacturing Science and Technology Vol. 45: 99-112

Atul Singh Rajput, Abhishek Patil, Manas Das, and?Sajan Kapil. 2023, ?Post processing of a low cost Aligners fabricated by additive manufacturing process to enhance the surface quality and functionality.? Journal of the Mechanical Behavior of Biomedical Materials: 106003

Amritesh Kumar, Ritam Sarma, Swarup Bag, V. C. Srivastava, and?Sajan Kapil. 2023, ?Physics-informed machine learning models for the prediction of transient temperature distribution of ferritic steel in directed energy deposition by cold metal transfer.? Science and Technology of Welding and Joining, 1-9

Brijesh Kumar Singh,?Sajan Kapil, and Shrikrishna N. Joshi. 2023, ?Numerical modeling of phase prediction and geometry evolution of micro-drilling using single pulse laser.? Materials Today: Proceedings, Vol.90 (1), 262-266

Atul Singh Rajput, Manas Das, and?Sajan Kapil. ?Optimization of surface roughness parameters in Hybrid-Chemo Magnetorheological Finishing (HC-MRF) process using Response Surface Methodology and Genetic Algorithm. 2023, ??Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science: 09544062231175783

Anand Mohan Pandey,??Sajan Kapil, and Manas Das. 2023, ?Numerical and experimental analysis of the localized electrodeposition (LED) based micro additive manufacturing process.? Materials Today: Proceedings

Atul Singh Rajput, Ambrish Singh,?Sajan Kapil, and Manas Das, 2022, ?Investigations on the trochoidal toolpath for processing the biomaterial through magnetorheological fluid assisted finishing process.? Journal of Manufacturing Processes, Vol 76, PP. 812-827

Avadh Kishore Prasad,?Sajan Kapil?and Swarup Bag, 2022, ?Critical conditions for melting of metallic wire in induction heating system through numerical simulation and experiments.?, Journal of Manufacturing Processes, Vol 77, pp. 678-693

Atul Singh Rajput,?Sajan Kapil, and Manas Das, 2022, Investigations on the Toolpath Strategies for CNC Magnetorheological Fluid Assisted Finishing (MFAF) Process?, The International Journal of Advanced Manufacturing Technology Vol. 23, PP. 1-18

Chandra Prakash Singh, Ritam Sarma,?Sajan Kapil, 2022, ?The Qualitative Analysis of Warpage on Residual Stresses in Wire Arc Additive Manufacturing?, Materials Today: Proceedings, 2022 May 14., Volume 62, Part 12, 2022, Pages 6619-6627

Ritam Sarma,?Sajan Kapil, and Shrikrishna N. Joshi., 2022 ?Development of a framework for computer aided design and manufacturing of 3 axis hybrid wire arc additive manufacturing.? Materials Today: Proceedings, 2022 May 14., Volume 62, Part 14, 2022, Pages 7625-7634

Ritam Sarma,?Sajan Kapil, S. N. Joshi, 2022, ?Build Strategies based on Substrate utilization for 3-axis Hybrid Wire Arc Additive Manufacturing Process?, journal of Advances in Materials Science and Engineering, 2022 May 30

Atul Singh Rajput, Manas Das,?Sajan Kapil, 2022, ?Characterization of Wear Resistance and Corrosion during Magnetorheological Fluid Assisted Finishing (MFAF) of Ti-6Al-4V and Duplex Stainless Steel for enhanced biocompatibility?, Journal of Process Mechanical Engineering: Part-E, PP-09544089221107990

Tanmoy Medhi, Ankan Das, Pardeep Pankaj,?Sajan Kapil, and Pankaj Biswas, 2022, ?Multi-Pass Friction Stir Lap Welding of AA 6061-T6: Implication of Tool Pin Overlapping on Microstructure and Mechanical Properties of Joints.? Soldagem & Inspe??o 27

Atul Singh Rajput, Manas Das,?Sajan Kapil, 2022, ?Investigations on a hybrid chemo-magnetorheological finishing process for freeform surface quality enhancement?, Journal of Manufacturing Processes, Vol 81, pp. 522-536?

Sajan Kapil, Atul Singh Rajput, Ritam Sarma, 2022, ?Hybridization in Wire Arc Additive Manufacturing?, Frontiers in Mechanical Engineering, 96

Ambrish Singh, Atul Singh Rajput,?Sajan Kapil, Manas Das, 2022, ?Parameter sensitivity analysis of centrifugal spreaders for dispersing metallic powders and material property evaluation for DEM simulation.? Powder Technology Vol. 411: 117958

Atul Singh Rajput, Manas Das,?Sajan Kapil, 2022, A Comprehensive Review of Magnetorheological Fluid Assisted Finishing Processes, Machining Science and Technology, 1-38

Sadaival Singh, Ambrish Singh,?Sajan Kapil, M Das, 2022, ?Utilization of a TSP Solver for Generating Non-Retractable, Direction Favouring Toolpath for Additive Manufacturing?, Additive Manufacturing, Vol. 59, 103126

Avadh Kishore Prasad,?Sajan Kapil, Swarup Bag, 2022, Tailoring coil geometry for secondary heating of substrate towards the development of induction heating-based wire additive manufacturing, Science and Technology of Welding and Joining, Vol. 27

Atul Singh Rajput, Manas Das, and?Sajan Kapil, 2022, ?Surface properties and biocompatibility studies on bone plate by magnetorheological finishing.? Surface Engineering, 1-10

Ambrish Singh, Seema Negi,?Sajan Kapil, K. P. Karunakaran, Manas Das, 2021, ?A Comprehensive Study of Auxiliary Arrangements for Attaining Omnidirectionality in Additive Manufacturing Machine Tools?. ASME, Manufacturing Science and Engineering, Vol 143 (5), pp. 050802 (1-17)

Sajan Kapil, Fisseha Legesse, Seema Negi, K. P. Karunakaran, and Swarup Bag, 2020, ?Hybrid layered manufacturing of a bimetallic injection mold of P20 tool steel and mild steel with conformal cooling channels?, Progress in Additive Manufacturing, Vol 5 (1), pp. 183?198

Panda, Subham Sekhar, Rimpy Chabra,?Sajan Kapil, and Virendra Patel, 2020, ?Chemical vapour treatment for enhancing the surface finish of PLA object produced by fused deposition method using the Taguchi optimization method.? SN Applied Sciences 2, Vol 5, pp: 1-13

J. Tharion,?Sajan Kapil, N. Muthu, J. G. Tharion and S. Kanagaraj, 2020, ?Rapid Manufacturable Ventilator for Respiratory Emergencies of COVID-19 Disease?, Transactions of the Indian National Academy of Engineering: Vol 7, pp 1-6

Ambrish Singh,?Sajan Kapil, Manas Das, 2020, ?A Comprehensive Review of the Methods and Mechanisms for Powder Feedstock Handling in Directed Energy Deposition?, Additive Manufacturing Journal, Vol 35, pp. 101388 (1-22)